No.0 Acrylic Bending Machine

Acrylic cracks and whitens when folded cold, and warps when the whole sheet is heated. Line heating softens only the fold: the corner stays clear, needs no polishing, and four table lengths cover 0.8–10 mm sheet.
What it solves
01A cold fold turns clear acrylic cloudy — the part is scrap.
Heating the entire sheet destroys flatness.
Flame polishing adds a process and a risk.
Core value
02No whitening.
No secondary polishing.
1.2–3 m, 0.8–10 mm.
How it works
03- 01Line heating
Adjustable heater gap softens a single strip along the fold.
- 02Aluminium table
Heat is drawn away, so surface gloss and masking film survive.
- 03Four table lengths
1.2 / 1.8 / 2.4 / 3 m, matched to the workpiece.
- 04End-of-heat alarm
Dwell is timed and signalled — no watching the clock.
Specifications
04| Sheet thickness | 0.8–10 mm (0.03 in–0.39 in) |
|---|---|
| Working length | 1200 / 1800 / 2400 / 3000 mm (9.8 ft) |
| Drive / control | pneumatic / CNC |
| Cooling | natural, water circuit optional |
| Bending angle | adjustable |
| Warranty | 1 year |
Advantages
05Forming
- Clear corners, no whitening, no polishing.
- No bubbles or cracks at the bend.
- Parallel fence keeps batch bend lines consistent.
Operation
- Hand control plus foot pedal: both hands stay on the sheet.
- Dwell, temperature and power set on the panel.
- Automatic and manual modes.
What it bends
06Machine detail


Video
Post a 200 × 200 mm offcut with material and thickness noted; we bend it to your angle and send photos plus video within 48 hours.
Request a trial bendAlso known as
07All names above refer to this machine — see the full alias index.
FAQ
08Does clear acrylic whiten?
No. Only the fold line is heated, so the bend stays clear and needs no polishing.
What thickness and lengths?
0.8–10 mm on 1.2, 1.8, 2.4 or 3 m tables; special sizes to order.

