No.0 SPC Flooring Bending Machine

SPC is heavily filled with stone powder: fold it cold and the line whitens and micro-cracks. This machine heats only the fold line and lets it set, producing stair nosing and edge trims from flooring planks.
What it solves
01A cold fold turns the line chalky — a visible defect on any finished floor.
Heating the whole plank destroys the wear layer and the print film.
Spring-back leaves a gap between nosing and tread.
Core value
02No white fold line.
Wear layer untouched.
3 m, 3–15 mm, fixed 90°.
How it works
03- 01Single-line heating
One heating line follows the fold, softening only that strip.
- 02Timed setting
The bend is held for a set time so the angle stabilises.
- 033 m table
Stair nosing, window boards and skirting are all within range.
- 04Fixed 90°
Consistent angle for batch production of trims.
Specifications
04| Sheet thickness | 3–15 mm (0.12 in–0.59 in) |
|---|---|
| Working length | 3000 mm (9.8 ft) |
| Bending angle | fixed 90° |
| Heating lines | 1 |
| Voltage | 220 V |
| Cooling | natural, timed |
Advantages
05Forming
- No whitening: wear layer and print film are untouched.
- Consistent 90° angle, so trims bed down tight.
- 3 m length covers stairs, sills and skirting.
Operation
- Heating and cooling times set on the panel.
- Pneumatic bending with automatic positioning.
- Compact single-line design, quick to learn.
What it bends
06Machine detail


Video
Post a 200 × 200 mm offcut with material and thickness noted; we bend it to your angle and send photos plus video within 48 hours.
Request a trial bendAlso known as
07All names above refer to this machine — see the full alias index.
FAQ
08Does SPC whiten when bent?
No. The line is softened before bending, and the wear layer and print film are not heated.
What length is available?
3 m, covering stair nosing, window boards and skirting.



