No.0 PVC Sheet Bending Machine

Bending a PVC tank means cutting, welding and grinding three corners — and the joints still leak. Line bending forms each corner from one continuous sheet: no welding rod, no weld seam, nothing to leak.
What it solves
01A welded seam is the thinnest ring on the whole tank, and liquid finds it first.
Cutting, welding and grinding cannot be done by one operator at one station.
Seam quality follows the hand of the man holding the torch.
Core value
02No weld seam: the corner is continuous parent material.
One fold instead of three processes.
Six table lengths from 1.5 m to 6 m.
How it works
03- 01Heat only the bend line
The aluminium table draws heat away, so the line softens and the 25 mm panel stays flat.
- 02CNC angle setting
60°–180° from the panel; a buffered stroke keeps the corner from whitening or cracking.
- 03Front and rear stops
Bend position is set by stops, not by pencil marks.
- 04Six table lengths
1.5 m to 6 m covers dust-collector boxes up to full 6 m tanks.
Specifications
04| Sheet thickness | up to 25 mm (0.98 in) |
|---|---|
| Bending length | 1500–6000 mm (4.9 ft–19.7 ft) |
| Bending angle | 60°–180°, adjustable |
| Minimum flange | 50 mm (2.0 in) |
| Power | 6–18 kW (by length) |
| Voltage / air | 380 V / 0.5 MPa |
Advantages
05Forming
- The corner is parent material, continuous — no weld seam, no rod residue.
- Flat enough to paint or screen-print without filler.
- 50 mm minimum flange, so narrow-sided tanks can still be bent.
Operation
- Touch screen sets temperature, time and angle; recipes can be stored.
- Manual and automatic modes switch at any time — one for trials, one for production.
- Foot pedal optional, so both hands stay on the sheet.
Structure
- One-piece frame: no deflection when bending on a 6 m table.
- Zoned heating keeps both ends of a long panel at the same temperature.
What it bends
06Machine detail


Video
Post a 200 × 200 mm offcut with material and thickness noted; we bend it to your angle and send photos plus video within 48 hours.
Request a trial bendAlso known as
07All names above refer to this machine — see the full alias index.
FAQ
08What is the maximum sheet thickness?
Up to 25 mm. Thicker sheet is better handled by the dual-side heated machine, or by a trial bend first.
Do I still need a welding rod for the corners?
No. The corner is continuous parent material, so a tank holds liquid without a seam to repair.




