No.0 Mat & Carpet Bending Machine

A mat is a laminated structure: face and backing expand differently, so a cold fold delaminates and curls. Line heating softens only the fold, leaves the pile untouched, and sets the angle so the edging beds down.
What it solves
01A cold fold pulls the face away from the backing.
Heating the whole surface flattens the tufts and darkens the colour.
Spring-back leaves a gap between edging and tread.
Core value
02Pile untouched.
No delamination.
Angle set to the staircase.
How it works
03- 01Heat only the fold line
Heat is concentrated on the fold; face pattern and pile are unaffected.
- 02Clamping bar
Both sides of the fold are held, so heat is even and the line does not wander.
- 03Timed setting
The bend is held for a set period, so the angle does not creep back.
- 04Angle adjustable
Stair nosing and tread returns are set to the site angle.
Specifications
04| Principle | thermoforming, line heating |
|---|---|
| Drive / control | pneumatic / CNC |
| Cooling | natural |
| Model | built to order |
| Bending angle | adjustable |
| Materials | mats, carpets, stair mats |
Advantages
05Forming
- Pile stays intact, tufts stay upright.
- No delamination, no curling at the edge.
- Edging follows the tread angle.
Operation
- Fold position and angle adjustable.
- Clamping bar keeps batch parts consistent.
- Recipes stored and recalled.
What it bends
06Machine detail


Video
Post a 200 × 200 mm offcut with material and thickness noted; we bend it to your angle and send photos plus video within 48 hours.
Request a trial bendAlso known as
07All names above refer to this machine — see the full alias index.
FAQ
08Will the mat delaminate?
No. Only the fold line softens, so face and backing move together.
Is the pile affected?
No. Heat is concentrated on the fold; the tufts never touch the heater.



