No.0 PP Honeycomb Sleeve Box Crease & Bending Machine

Honeycomb board is a hollow structure: bend it cold and the core crushes. This machine presses a structurally sound crease line where the box will fold, turning a flat honeycomb panel into a returnable sleeve box.
What it solves
01A crushed honeycomb core cannot hold the box upright.
Uneven crease depth makes the box fold crooked.
Creases crack after a few folding cycles.
Core value
02Six creases, 40 seconds.
Core supported, box square.
3.5 m or 6 m panels.
How it works
03- 01Far-infrared pre-heating
The crease zone softens before pressing, so the core does not shatter.
- 02Temperature-controlled die
Die temperature up to 200 °C keeps forming stable and prevents sticking.
- 03Multi-station
3 stations handle 3.5 m panels, 6 stations handle 6 m panels.
- 04Pitch adjustable
Minimum crease pitch 260 mm, laid out to the box size.
Specifications
04| Sheet thickness | 0.5–30 mm (0.02 in–1.2 in) |
|---|---|
| Max. panel length | 3.5 m (3-station) / 6 m (6-station) |
| Press force | 150 t / 300 t |
| Speed | 40 s per panel |
| Die temperature | up to 200 °C |
| Min. crease pitch | 260 mm (10.2 in) |
Advantages
05Forming
- Six creases pressed in one cycle, position and depth consistent.
- Core stays supported, so the box stands square.
- Creases survive repeated folding.
Process
- 3.5 m or 6 m panels, station count chosen by box size.
- Die temperature controlled: no sticking, no scorching.
- 260 mm minimum pitch fits small boxes.
What it bends
06Machine detail


Video
Post a 200 × 200 mm offcut with material and thickness noted; we bend it to your angle and send photos plus video within 48 hours.
Request a trial bendAlso known as
07All names above refer to this machine — see the full alias index.
FAQ
08How many creases per panel?
Six, laid out to the box size, with a minimum pitch of 260 mm.
Will the creases crack?
No. The crease zone is pre-heated and pressed with a temperature-controlled die.

