No.0 Refrigerator Back Panel Bending Machine

Two heating lines soften only the lines to be folded, then a pneumatic stroke bends and a water-cooled die sets the angle. For 0.6–2 mm panels, one part every 15 seconds.
What it solves
01Thin sheet warps when the entire panel is heated.
The angle creeps back and the holes no longer line up at assembly.
Waiting for natural cooling costs tens of seconds per part.
Core value
02Only the fold line is heated.
Water-cooled, low spring-back.
15 seconds per panel.
How it works
03- 01Dual-line heating
Two lines work together so a U-shape is formed in one pass.
- 02Water-cooled setting
The corner is cooled under pressure: low spring-back, stable angle.
- 03Adjustable U-width
350–750 mm, set to the panel width.
- 04Heater retracts
After bending the heater drops and switches off, so residual heat cannot mark the surface.
Specifications
04| Sheet thickness | 0.6–2 mm (0.02 in–0.08 in) |
|---|---|
| Max. bending length | 1600 mm (5.2 ft) |
| U-shape width | 350–750 mm (1.1 ft–2.5 ft), adjustable |
| Cycle | 15 s per panel |
| Cooling | water tank, closed loop |
| Voltage / power | 220 V / 3.2 kW |
Advantages
05Forming
- Only the fold line is heated: the panel stays flat and unmarked.
- Water cooling reduces spring-back.
- Both U-bends formed in one pass, symmetrical.
Control
- Touch screen sets heating, cooling and temperature.
- Manual and automatic modes for trials.
- Foot pedal optional.
What it bends
06Machine detail


Video
Post a 200 × 200 mm offcut with material and thickness noted; we bend it to your angle and send photos plus video within 48 hours.
Request a trial bendAlso known as
07All names above refer to this machine — see the full alias index.
FAQ
08Will a thin panel distort?
No. Only the fold line is heated, so the panel stays flat.
How fast is one part?
15 seconds including heating, bending and water cooling.



