No.0 Machinery Get a quote +86 135 8587 6500
Home/Products/Special-Purpose Bending Machines/No.0 Plating Barrel Bending Machine
SPECIAL APPLICATIONS

No.0 Plating Barrel Bending Machine

LH-1500(ZH) – LH-5000(ZH)A barrel from one sheet, one seam instead of six.
No.0 Plating Barrel Bending Machine LH-1500(ZH) – LH-5000(ZH) — plating barrel shells
up to 25 mm(0.98 in)Sheet thickness
1500–5000 mm(4.9 ft–16.4 ft)Bending length
60°–180°, adjustableBending angle
hexagonal / octagonal / polygonalBarrel forms

One PP sheet is folded into a polygonal barrel — 120° per face for a hexagon, 135° for an octagon. The barrel closes with a single longitudinal seam instead of six.

What it solves

01
Six seams, six leak paths

Every welded seam is where plating solution starts to seep.

Barrels that wobble

Hand-welded barrels lose concentricity and run out of true.

Grinding inside is hard

Seams must be polished, and the inner wall is the hardest place to reach.

Core value

02
01

One sheet, one seam.

02

Concentric barrels that run true.

03

Five fewer seams to grind.

How it works

03
  1. 01
    Face-by-face folding

    The sheet is fed and bent at the set angle, face after face.

  2. 02
    Closed-form accuracy

    Servo feed keeps every face the same length, so the last seam lines up.

  3. 03
    Fewer seams, fewer leaks

    One longitudinal weld instead of six.

  4. 04
    Buffered stroke

    Thick sheet folds without cracking, keeping barrel strength.

Specifications

04
Sheet thicknessup to 25 mm (0.98 in)
Bending length1500–5000 mm (4.9 ft–16.4 ft)
Bending angle60°–180°, adjustable
Barrel formshexagonal / octagonal / polygonal
Power6–14 kW
Voltage380 V / 50 Hz

Advantages

05

Barrel forming

  • Hexagon at 120°, octagon at 135°, face by face.
  • One sheet, one revolution, one seam.
  • Concentricity comes from the program, not from the welder.

Control

  • CNC feed keeps every face equal.
  • Barrel presets stored; change form by changing face count and angle.
  • Buffered stroke for thick sheet.

What it bends

06
Plating barrel shellsBarrel plating drumsChemical vesselsDust-collector housings

Machine detail

No.0 Plating Barrel Bending Machine — detail 1 (LH-1500(ZH) – LH-5000(ZH))No.0 Plating Barrel Bending Machine — detail 2 (LH-1500(ZH) – LH-5000(ZH))

Video

Send a sample sheet

Post a 200 × 200 mm offcut with material and thickness noted; we bend it to your angle and send photos plus video within 48 hours.

Request a trial bend

Also known as

07
Plating Barrel BenderBarrel Shell Bending MachinePP Barrel Bending MachineHexagonal Barrel BenderOctagonal Barrel BenderPlating Drum Bending Machine

All names above refer to this machine — see the full alias index.

FAQ

08
How many folds does one barrel need?

Six for a hexagonal shell, eight for an octagonal one — each barrel closes with one longitudinal seam.

What about concentricity?

Servo feeding keeps every face the same length, so the shell runs true.